GOVERNOR Class

Car Body ( the wooden/material structure that holds the weight, axles and other add ons)/ Total Car Dimensions

Wheel Base : Any as long as wheels do not exceed the 7″ total length requirement
Total Car Height : Not to exceed 3″ inches…
Total Car Length : Not to exceed 7″ inches…
Total Car BODY Width : Not to exceed 1-3/4″ inches…
Total Car Weight : Not to exceed 2.0 ounces (+.04) measured on 1/10th digital scale

Additional materials maybe added as long as they meet the rules

4 Axles & Wheels must be installed to the side of the car body directly across from one another / No more than a 10 degree angle

Track Center Rail Height : 1/4″ inch ( 7mm ) *
Track Center Rail Width : 1 5/8″ inches (4.2 cm) *

* Wheels must clear the outside to outside center rail width measurement

Axles

a. Minimum diameter .084
b. Axles must have a nail head

Wheels (No bearings)

BSA

a. May be CnCed, lathed, polished and/or sanded to true the edge of tread, surface and circumference
b. The tread / contact surface must remain flat and parallel to the bore as humanly possible
c. 7.5mm Minimum Width from the inner edge to the tread bumps or where the bumps are removed.
d. All writing and spokes must remain visible on the outside of the wheel.